In mid-February, the following product safety recall was voluntarily conducted by Bosch Security Systems of Fairport, NY, in cooperation with the U.S. Consumer Product Safety Commission. Consumers should stop using this product immediately unless otherwise instructed. It is illegal to attempt to resell a recalled consumer product.
The name of the Bosch product is the Fire Alarm Control Panel. The fire alarm panel is a locking red wall box with dimensions of 22.7 inches high by 14.5 inches wide by 4.3 inches deep. The status, date and time can be seen through a glass screen on the panel door. The word BOSCH is printed on the right corner of the panel and the model number FPA-1000-UL is printed on the bottom left below the glass screen. The alarm panels featured software versions 1.10, 1.11 and 1.12, which can be determined by installers. These units were designed to be used in small to medium-sized facilities, in both public and residential buildings. These were sold at authorized distributors and installers nationwide from May 2009 through October 2011. They were manufactured in China.
About 330 units are being recalled because when the “alarm verification” feature of the system is turned on, the control panel could fail to sound an alarm if a fire occurs. In addition, on systems with 50 or more reporting stations, a delay in sounding an alarm and reporting a fire might occur if the loop for the alarm system is broken.
The post Fire Control Panels Recalled Due to Alarm Failure, Posing a Fire and Burn Hazard appeared first on Burn Injury Resource Center.
